A flat profile can be recognized by the flap at the base of the profile. This flap is clamped under a plate. The profile is screwed, riveted, or stapled to the inside of the refrigerator door by this plate or strip. In other cases, the seal itself is screwed against the inside of the refrigerator door.
Most flat profiles standardly have a built-in magnet, recognizable by the addition -M in the profile code. There are some flat profiles without a magnet; these are indicated with -R.
Need help finding the right flat profile?
Not sure which profile you need? Search by brand and model of your refrigeration unit or compare the profile code with your existing door gasket. Once you have found the correct profile, you can use the configurator to specify both the color and dimensions to calculate the price directly.
How does a flat profile work?
The flap at the base of the profile is clamped under a plate or strip, which is then screwed, riveted, or stapled to the inside of the refrigerator door. In other cases, the seal itself is screwed directly against the inside of the door. Unlike push-in profiles, you always need tools such as a screwdriver, rivet gun, or staple gun for mounting and replacing a flat profile.
If the door gasket to be replaced is secured with rivets, these must first be drilled out. Our advice is to then secure it with screws so that it is easier to replace. Use flat-head screws.
With or without magnet
- -M: profile with standard built-in magnet. Ensures a good seal against the door frame and is the most common version.
- -A or -R: profile without magnet. Used when the door or drawer does not use a magnetic closure or when another closing method is required.
When replacing, always check the old profile code or the exact dimensions, so that the new profile has the same fit and closure. If necessary, use the page door gasket dimensions for this.
Where is a flat profile used?
Flat profiles are used in refrigerators, freezers, cold rooms, and drawers. These are usually older refrigeration units for which it is often no longer possible to obtain an original door gasket from the manufacturer. Most newer refrigerators are equipped with a push-in profile, which is easier to replace.
Find the right flat profile
DSU supplies flat profiles in various sizes and designs, with and without a magnet. You can choose from three materials: Standard PVC (-M/-R), Soft PVC (-MS), and Extended Life TPE (-ME). Additionally, counter-welded profiles are available, where the profile is mirror-welded, and profiles with an extra strong magnet. You can filter by material and design or search by brand and model of your equipment.
How to compare the right profile
The most important factors for choosing the right flat profile or a suitable alternative are the working height and width. The working height is the part that is not under the plate/mounting strip. If the working height deviates too much, the door will not close properly. There will be a gap or the door will not close.
In the drawings on the website and in the catalog, the left side is always the outside of the profile once it is incorporated into the door gasket.
Frequently asked questions about flat profiles
Look at the base of the door gasket. If there's a flap that is clamped under a plate or strip and screwed, riveted, or stapled, then you have a flat profile. If, instead, there is an arrow with barbs that clamps into a groove, then it is a push-in profile.
The addition -M means that the profile has a built-in magnet. The additions -A and -R indicate that the profile does not contain a magnet. Furthermore, -MS and -ME indicate the material: -MS stands for Soft PVC, -ME for Extended Life TPE. This is relevant because when replacing, you want to maintain the same version as the original profile, unless you deliberately want a different version.
Then look for a suitable alternative profile with the same working height and width. View the explanation on Find alternative profile. In doubt? Feel free to contact us, and we will find the right solution together.
Push-in profiles are used by many different manufacturers of refrigeration equipment. The correct profile depends on the exact dimensions and mounting method of the door, not just the brand. Therefore, preferably search by brand and model, or measure the existing profile and compare it with our drawings.
This can be done in two ways for flat profiles. You measure the outer dimensions of the door gasket or the distance between the outer edges of the magnetic strip. With many flat profiles, the magnetic strip is on the outside of the profile (if you look at the cross-section), and thus that measurement corresponds to the outer dimensions. For this, we have a handy instruction video
Yes, but unlike push-in profiles, you will need tools and skill for this: a power drill or screwdriver, rivet gun, or staple gun, depending on the mounting method. View our instruction video.
At DSU, we have over 900 brands; unfortunately, there's a multitude of model numbers, and new models are constantly entering the market. When the model numbers are known, they are listed on the brand page. If the model number is not known to us, that's not a problem. We custom-produce everything. Determine the correct flat profile and size and use the configuration tool to place your order. Optionally, add the brand and model number to the reference so we can complete our information.
