There are hundreds of different profiles used in refrigerators and freezers. With a few steps, you can quickly discover which profile you need. The fastest route: first search by brand for a shortlist. If that doesn't work? Then compare the shape of your profile within the correct category.
Order by type number or part number
For common brands, we have a list of model, type, and part numbers. Click on the correct number and you will enter a pre-filled configuration tool, allowing you to order directly.
No type number? Order custom
If the type number is not listed, order custom. This is how you find the right profile:
- Search by brand. For each brand, we show which profiles are known. This way, you go from over 450 profiles to a shortlist in one go.
- Compare the shape. Cut a small piece of the profile, from the top or side of the door, and compare the cross-section with our profile drawings. Please note: the left side of our drawing is the outside of the door seal.
Brand unknown? Search via categories
If the brand is unknown or your profile is not listed among the brands on our website, you can search via our categories. These are categorized by mounting method or material. Compare your door seal with the characteristics per profile type:
- A push-in profile has a pointed arrow with barbs on the inside, which clamps into a groove in the door.
- A flat profile has a flat flap at the base, which is clamped under a plate or strip and screwed, riveted, or stapled.
- A beaded profile resembles a flat profile, but has a "bead" at the end of the flap.
- A hollow profile is attached like a flat or beaded profile, but has no magnet chamber.
- A rubber profile is made of rubber or EPDM instead of PVC and can be recognized by its distinctly thicker wall. Often used in cold rooms or freezer rooms.
- A silicone profile is made of silicone instead of PVC and has a distinctly thicker wall. It is often smoother and shinier than rubber. Silicone profiles are used in heated cabinets and ovens.
Do you know which category to search in? Then compare the drawings of our profiles with the cross-section of the profile in your refrigeration unit.
It is also possible to compare physically. Place your profile on our catalog with 1:1 drawings. Do you want to test in your refrigeration unit? Request a loose sample piece or use the sample case.
Need an alternative profile?
If the original door seal is no longer available, there are other solutions. Check the alternative profiles.
Need help?
Send us a photo of the current profile. This can be done via the form or WhatsApp. Ensure that the cross-section of the profile is clearly visible. We identify the profile by that part. We will then advise you on which type you need or offer an equivalent alternative.
Contact Form
Is the profile still in the door?
Then cut a small piece of the profile from the top or side, so you can clearly photograph the cross-section. Do not cut from the bottom. Cold air sinks, making it easier for air to escape there if the profile is cut.
