Rubber profiles are used as door gaskets or draft seals for cold rooms and freezer rooms. The rubber we supply is flexible, durable, and wear-resistant. You can order these profiles per linear meter or on a roll of, for example, 25 meters. Cold room doors often also have a sweep seal that seals the bottom of the door against the floor.
Jump to...
Types of cold room door gaskets
In cold and freezer rooms, you usually find rubber profiles, but PVC profiles also occur. Therefore, first check what material it is. The difference is easy to see. PVC has a wall thickness of less than 1 mm. Rubber is several millimeters thick and almost always black. Is there a magnet in the profile? Then it is not rubber, because rubber profiles never contain a magnet.
- Rubber profile: the most common type for cold rooms and freezer rooms.
- PVC profile: thinner profile, often with a magnet.
Replacing a cold room door gasket? Keep this in mind
Are you wondering if your cold room door gasket needs replacing? Look for these signs:
- The profile has hardened or shows cracks
- The door no longer closes properly or a gap remains visible
- There is a noticeable draft loss along the door
When a cold room door gasket is worn out, cold air escapes. This can pose a risk to food safety, as the temperature in the cold room does not remain stable. Additionally, it costs extra energy. Because rubber cannot be welded, you always repair or extend a cold room door gasket with rubber adhesive. View the full range of adhesives in the cleaning, adhesive, and tools category.
The right profile starts with the right choice
Compare the shape of your old profile and order what you need. In the calculation tool, you can see the ordering options for each profile. Some profiles we supply as a frame with fused corners, others only per meter. For some profiles, corner pieces and mounting strips are also available. When replacing, always check the old profile code or the exact dimensions, so that the new profile has the same fit and seal. If necessary, use the page dimensions of door gaskets for this.
Order in a few steps
- Determine the profile. Search by brand or by type and shape of the profile
- Choose how to order. Per linear meter, on a roll or, where possible, as a frame
- Choose to order per linear meter or on a roll
- Optionally order matching corner pieces and mounting strips
- Place your order
New to DSU? With your first order as a refrigeration company, you will receive a free sample case with commonly used profiles. We ship your order quickly: within 2 to 5 days it will be shipped with the delivery service.
Usually rubber. This material is flexible, durable, and wear-resistant, making it ideally suited for cold rooms and freezer rooms. Sometimes PVC profiles are also used. You can recognize these by their thin wall of less than 1 mm.
Rubber profiles are usually ordered per linear meter or on a roll. Some profiles we also supply as ready-made frames with fused corners. In the calculation tool, you can see the available options for each profile.
Repair or extend the profile with rubber adhesive, as rubber cannot be welded. View our range of rubber adhesives in the cleaning, adhesive, and tools category.
For some profiles, yes. You can find these in the rubber profiles and mounting strips categories.
